AAA Material Handling products sells Tri Boro 
Shelving and Steel products.  BEST BUY!
GREATEST SELECTION TOO!

Clegg Company
Manufacturers reps and distributor/dealers
1444 S. Kelly Rd.">

AAA Material Handling products sells Tri Boro 
Shelving and Steel products.  BEST BUY!
GREATEST SELECTION TOO!

Clegg Company
Manufacturers reps and distributor/dealers
1444 S. Kelly Rd., Schenectady, NY 12306
Call 518-864-5396 or fax 518-864-5474|
800-761-3122
 FAX THIS ORDER FORM TOLL FREE!!
M-F, 8 am - 4:30 PM, EST

Credit Application Here as .pdf


 Home | Tri-Boro First Page | General Shelving Specs
Flanged Klip It Shelving | Boxer Edge Shelving
 Flange Edge, Thunderbolt Bolted Shelving
Rivet Rak

Shelving Comparison Guide
Edsal, Lyons, Parent, Tri-Boro

 
Open Shelving - Closed Shelving
Boxed edges for strength and clips for adjustability
Three Post Heights - Three Steel Gauges
Seven Shelf Depths - Three Shelf Widths
Bolted Shelving also

- For Price see Shelving Comparison Guide Edsal, Lyons, Parent, Tri-Boro

BOXER SHELF - Shelves shall be constructed of 18, 20 or 22 gauge steel with full welded box formation in front and back of shelf and shall have formed channels on both ends. All corners shall be fully lapped and welded in each corner. The box formation shall be welded on a minimum of 6" centers, the entire length of the box. All shelves shall have a profile height of 1-1/4''. Shelves shall be designed to allow for use of shelf clips or to allow shelf to be bolted to uprights.  See price link below.

LOAD CAPACITY COMPARISON CHART-Boxed Edge
Size 18 Gauge Capacity
Part # Suffix is "X"		 20 Gauge Capacity
Part # Suffix is none		 22 Gauge Capacity
Part # Suffix is "22"
12x36 1100 850 600
12x42 900 650 450
12x48 750 550 400
15x36 1100 825 600
15x42 900 625 450
15x48 850 600 400
18x36 1200 850 600
18x42 950 650 500
18x48 900 550 400
24x36 1200 850 550
24x42 1000 650 450
24x48 900 550 400
30x36 1200 650 N/A
30x42 900 625 N/A
30x48 750 500 N/A
36x36 900 550 N/A
36x42 850 525 N/A
36x48 750 500 N/A
Flange Edge Shelf - Good general duty parts shelving for medium to heavy applications.  Reinforcing bars can be added to increase shelf capacities.  So, in the light product end of the warehouse, don't pay for shelving strength not needed, buy reinforcing bars for the heavy load products.

USED FOR BOTH KLIP IT AND 
THUNDERBOLT SHELVING

Load Capacities for Flange Shelving, both Klip It and Thunderbolt

Shelf Plain 20 ga. Plain 18 ga 
(X suffix)		 1 Reinforcing Bar
20 ga		 2 Reinforcing Bar
20 ga		 1 Reinforcing Bar
18 ga		 2 Reinforcing Bar
18 ga
12 x 36
12 x 42
12 x 48
15 x 36
15 x 42
15 x 48
18 x 36
18 x 42
18 x 48
24 x 36
24 x 42
24 x 48
30 x 36
30 x 42
30 x 48
36 x 36
36 x 42
36 x 48		 400
350
300
400
325
300
400
300
275
400
300
275
300
275
225
275
275
225		 775
550
450
750
525
450
750
500
425
700
500
375
550
450
350
450
450
350		 700
550
450
700
550
450
700
550
450
700
550
400
650
500
350
500
450
325		 950
800
600
950
750
575
950
750
575
950
700
500
800
700
450
575
550
425		 950
650
575
900
750
575
875
750
550
850
700
475
675
700
450
550
550
425		 1250
1100
700
1150
900
700
1100
850
700
1050
850
600
900
850
525
700
600
500

 

ANGLE UPRIGHTS click to launch post explanation: Angle upright shall be constructed of 14 gauge steel, formed into an angle formation with one leg of the angle being 1" and the other leg being 1-7/8". The 1-7/8" leg shall have a 1/2" deep offset with square slots in it to accept the shelf clip and to allow the shelf to fit flush with post face. Each face shall have holes to allow shelves to be bolted into place on either left or right of post. Uprights shall be designed to allow for shelves to be adjustable on 1-1/2" centers using either bolts of shelf clips.

BOX POST: Box post shall be constructed of 14 gauge steel formed into a hollow "Box" formation with a profile of 1-15/16" deep. The post shall be designed in such a manner that allows the shelf clip to recess into the post, allowing the shelf to sit flush with the post. Shelf shall have a recess with slots, in the recess, to accept shelf clip. The post shall have holes to allow shelf to be bolted to upright. Shelf shall be adjusted on 1-1/2" centers using either bolts or shelf clips.

SHELF CLIP: Shelf clip shall be constructed of 13 gauge steel formed into channel with two hooks to engage upright. Hooks on clip shall be a minimum of 3/8" wide and must engage into post a minimum of 1/4". Shelf clip shall engage upright post at two points and hooks shall be on 1-l/2" centers. Shelf clip shall be plated with a durable coating to give extra life to clip.

END & BACK PANELS: End and back panels shall be formed of 24 gauge steel.

SWAY BRACES: Sway braces are of 13 gauge steel, installed to form an "X" on both back and sides and shall be adjustable on 1-1/2" centers.

For Price Comparison see Shelving Comparison Guide as .pdf Edsal, Lyons, Parent, Tri-Boro

Boxer Edge Shelving Price Guide as .pdf for 3 heights with 5 shelves, Open and Closed, Starters and Adders
05/09/08 PRICES MAY NOT BE CURRENT DUE TO RISE IN STEEL COSTS 

Clegg Company, LLC 
Webmaster mclegg at forkliftcosts.com