AAA Material Handling Equipment by Clegg Co., Upstate NY;  Carpet Poles, 
Rug Poles, Carpet Rams, Rug Rams, Coil Rams Fork Mounted Rug Rams, 
Rug Poles, and Carpet Dollies

800-761-3122
Credit Application Here as .pdf

TOLL FREE FAX ORDER FORM

[Home] | [Material Handling Directory] | Order Form

Carpet Poles, Rug Rams

Carriage Mount With Pole - mounts and poles available separately Prices Below.	Carriage Mount With Pole - mounts and poles available separately Prices Below.
Inverted Mount with Pole - mounts and poles available separately Prices Below. 15" radius to center of pole.	$395.00 SHIPS Free in MOST States Portable Carpet Dolly Model Overall Size Cap. Net Weight (lbs) CARPET-45 26"Wx60"Lx20"H 500 45 Frght class 80

SEE LOAD CENTER CAPACITY WORKSHEET TO DETERMINE YOUR TRUCK CAPACITY WHEN USING THESE MOUNTS WITH A POLE CR Mount --------------- FM Mount ----------------------- FM1 Mount See colorized chart below for prices with these mounts. STANDARD 2.5" POLES HAVE A 2500 LB. CAPACITY EVENLY DISTRIBUTED LOAD BUT ANY POLE AND MOUNT CAN BE BENT OR BROKEN BY MISUSE THERE IS NO WARRANTY FOR BENDING AND BREAKING POLES  OR MOUNTS; KNOW HOW TO USE IT OR DON'T BUY IT.

Due to fluctuating steel prices, all prices are subject to change

Carriage Mount is semi-permanent, remove forks, install ram and mount, bottom clips are then bolted.
Fork mounted poles come with a mount that accepts standard Class II forks, but load rating drops as the rug ram is actually
 farther away from the truck than with the conventional mount.  You MUST know roll weights and understand the lift capacity of your machine!  
Class of carriage - generally a Class II carriage is 16" tall and a Class III is 20".  Class II is found on most forklifts
 through 5000 and even 6000 lb lift capacity.  Class III on heavier trucks, rarely found used with carpet poles.

CAUTION! A forklift WITH a side shifter will have less capacity than one without, because the side shifter mechanism moves 
the forks further out, about 4", while the trucks factory rating is based on having NO side shifter.  Your data plate MUST state
this lowered value.  You should see on the data plate:
S/S    24"    XXXX lbs or kg This difference in lift truck capacity, with and without side shifter, should also be 
subtracted from the capacity calculations in the following table.  Example: If your 5000 lb. capacity forklift's data plate 
says the capacity WITH S/S is 4800, than you should take 200 lbs. off the calculations below to truly know what your forklift 
can safely pick up with the 3 types of rug pole mounts.

A word about POLES - Our Poles are known as Stres-Proof. These are heat treated and 
case hardened steel composition is 1044.  You'll never weld it or drill it.  If you do weld it's butt 
into a mount, it'll fracture the weld and possibly the pole.  THAT'S why they are NEVER welded.

Price Note: There are cheaper carpet poles on the market, but not made nearly as well.  One maker uses 1 lonely bottom clamp 
on the carriage mount with 1 bolt.  Anyone that ever used a carpet pole knows how much twist and torque can be on a pole, 
one bolt and clamp is NOT going to  make 10 years hard use.  Liability is a big issue.  Our poles are made rugged with 2 clamps 
and 2 bolts in each.  The pole is 4" deep in the socket, the plate stiffened with heavy channel steel.

Bigger diameter rams available.  Even SMALLER rams. 
Class III Carpet Rams available.

How to Purchase; order form

Our Full On-Line Catalog Here, Thousands of Products, All Priced Out!

05/09/08 PRICES MAY NOT BE CURRENT DUE TO RISE IN STEEL COSTS

 

Material handling products Clegg Co. copyright March 2000
Webmaster edclegg at forkliftcosts.com