AAA Material Handling Equipment, Clegg Co. Sells Rol-Lift Pallet Jack Parts

AAA Material Handling Equipment, Upstate, NY by Clegg Co. Sells
Rol-Lift Pallet Jack Wheels and Seal Kits ONLY Nationwide
Clegg Equipment
1444 S. Kelly Rd. - Schenectady, NY 12306
(518) 864-5396 Main - (518) 864-5474 Fax
800-761-3122 and 866-569-8801 fx

Parts Order Form here - We take ALL Major cards,
WE TAKE ALL MAJOR CREDIT CARDS, MINIMUM ORDER $20

Due to UPS shipping charges and fees, each shipment will carry a MINIMUM charge of
$8.00 small parts to $10.00+ wheels etc S&H.

Home

Material Handling Directory

Master Parts Catalog Page

Rol-Lift Wheels
We do not stock and will not be ordering any other Rol-Lift Items EXCEPT wheels, and seal kits.
Most of the other items have been increasingly hard to get or are NLA.

Caution: These jacks on these pages are mostly garden variety standards, collapse to 3" and raise to 7" or there-abouts.
YOU might have a low profile jack and not know it, the give away is the wheels. MOST common jacks use fork load wheels
measuring 2.75" to 3.25" OD, and steer wheels of 6.5" to 8". If your jack has wheels LESS than these numbers, you may need
extra assistance buying wheels.

Item	Part No.	Description	Price
13	RL3-70002 order as RL 134750	Bearing, flanged end see picture. Axle end takes roll pin. We don't keep a lot on hand loose, generally kept for my wheel stock.	$9.80
14 RL-32 on right click to enlarge	RL-32 8" OD	8" OD x 2" wide, Steer Wheel, with flanged bearings Bearing OD 1.75" and ID .75" For Series "T" Jacks NOT Series "E 2.9" see item 33 which has a 7.5" OD and uses a different bearing set up.	$52.00 ea
28 RL-31-3" on right click to enlarge	Series E and T RL-31-3 RL-31-3.25	3" OD Load Roller w/ bearings, Series E and T Frame 3.25" OD Load Roller w/ bearings, Series E and T Frame Bearing OD 1.75" and ID .75" You MUST measure your wheels before calling. SEE IMAGE FOR BEARING STYLE IN USE THIS PART NUMBER	$42.00 ea.
32	RLBRG-5000-TPTUM	Included with Item #14 and 28 6204ZZ bearing (zz means double shield, yours may have 2RS)	$11.80 ea.
33 WHL-5012 on left click to enlarge	RLWHL-5012-TPTUM 7 1/2" OD	Series T 2.9 and E 2.9 7.5" OD x 2" wide, Steer Wheel inc. 6204ZZ-12 bearings, S OD 1.85" and ID .750" Used on series "T 2.9" AND Series "E"jacks - just measure and look at bearings, the 8" Rol-Lift wheel uses a different bearing design.	$52.00 ea.
41 WHL-5013 left side click to enlarge	RLWHL-5013-TPTUM	Series T 2.9 and E 2.9 Load Roller Assy with bearings 3 x 3 3/4 with 6204ZZ-12 brg, OD 1.85" and ID .750" SEE IMAGE FOR BEARING STYLE IN USE THIS PART NUMBER	$42.00 ea.

Rol-Lift Series T Frame
We do not stock and will not be ordering any other Rol-Lift Items EXCEPT wheels, and seal kit.
Most of the other items have been increasingly hard to get or are NLA.

Item	Part No.	Description	Price
13	RL3-70002	Bearing, flanged end see picture. Axle end takes roll pin. We don't keep a lot on hand loose, generally kept for my wheel stock.	$11.80
14	RL-32 See Pix of 2 styles of Rol-Lift Steer wheel RL-32 on right	8" OD x 2" wide, Steer Wheel, with bearings For Series "T" Jacks	$52.00 ea.
29	Series E and T RL-31-3	3" OD Load Roller w/ bearings, Series E and T Frame Flanged Bearing OD 1.75" and ID .75" You MUST measure your wheels before calling.	$42.00 ea.
33	RLBRG-5000-TPTUM	Wheel Bearing that presses all the way in. Inc. w/ Item #29 and 34	$10.50 ea.
34	RLWHL-5012-TPTUM See Pix of 2 styles of Rol-Lift Steer wheel 5012 on left	7.5" OD x 2" wide, Steer Wheel inc. bearings Bearings OD 1.85" and ID .750" Used on series "T 2.9" jacks - just measure and look at bearings, the 8" Rol-Lift wheel uses a different bearing design.	$52.00 ea.
43	RLWHL-5013-TPTUM	Series T 2.9 and E 2.9 Load Roller Assy with bearings 3" of x 3 3/4" with 3/4" shaft bearing 6204-12 Bearings OD 1.85" and ID .750"	$42.00 ea.

5000 Lb Seal Kit Series T & E Pump Repair Kit

T5BOK Kit $70.00

price changes 10/3/03 ec