AAA Material Handling Equipment, Upstate, NY by Clegg Co. Sells  Mobile Brand Pallet Jack Parts Nationwide Clegg Equipment 1444 S. Kelly Rd. - Schenectady, NY 12306 (518) 864-5396 Main - (518) 864-5474 Fax 800-761-3122 and 866-569-8801 fx Open 8 - 4:30 PM EST M-F Order Form here - We take ALL Major cards, School District and Municipal PO's Welcome, with credit card back up MINIMUM ORDER $20 Parts in green are stock items Due to UPS shipping charges and fees, each shipment will carry a MINIMUM charge of   $8.00 small parts to $10.00+ wheels etc S&H. ALL PRICES, ALL PAGES SUBJECT TO CHANGE

Home  Material Handling Directory Master Parts Catalog Page Other Pallet Jack Brand Wheels BOOKMARK PAGE!

Caution:   These jacks on these pages are mostly garden variety standards, collapse to 3" and raise to 7" or there-abouts.
YOU might have a low profile jack and not know it, the give away is the wheels.  MOST common jacks use fork load wheels
 measuring 2.75" to 3.25" OD, and steer wheels of 6.5" to 8".  If your jack has wheels LESS than these numbers, you may need 
extra assistance buying wheels. 

Mobile ML 50 and 55 Series Parts

Click to enlarge, then hover mouse pointer to find colored  4 arrow box, click to enlarge or shrink image. Mobile ML50 & 55 Frame HINT - Look at the PUSH ROD in the print, item 29 and item 20, they are physically different.  Which type do you have?  That will tell you if you should order OLD Style or NEW Style. Parts Order Form here Exploded Parts Page - Thumbnail Click and Print from New Window Ref # Part Description Price 1 ML203 w/ Bearing M210 ---------------- ML203 w/ Bearing M210-1 Load roller Assy. Poly 3" Diamter 3.5" long M210 Bearing (Old Style) Labeled #6204-12 Bearing OD 1.85" and ID .750" (see pictures) -------------------------------- Load roller Assy. Poly 3" Diamter 3.5" long M210-1 Brg (New Style) labeled #6204 Bearing OD 1.85" and ID .78" --------------------------------- The only difference in these bearings is inner bore diameter, .03" difference!  You have to take a wheel off, clean the bearing and see what number appears.  We have no idea when the bearings changed in serial numbers of jacks. $39.00 2 M210 Bearing 3/4" ID  (Old Style) Stenciled 6204-12 (RS or ZZ is rubber seal, or steel shield) $17.10 3 M404 Roll Pin $1.10 4 M211 Load Roller Axle 3/4" DIA  (Old Style) $10.90 5 M400 Load Roller Bracket (Old style; Incl Ref# 4, 8 & 11) SP ORD 6 M610 Bushing $6.10 7 M402 Entry or Exit Roller $10.10 8 M609 Roll Pin $1.10 9 M214 Pivot Axle $13.00 10 M210-1 Bearing 20MM (.780") ID (New Style) Stenciled 6204 (RS or ZZ is rubber seal, or steel shield) $19.10 11 M211-1 Load Roller Axle 20mm (.780") DIA (New Style) $15.60 12 M300 Entry Roller $9.40 13 M400-1 Load Roller Bracket (New style; incl ref# 8, 11 & 19) SP ORD 14 M311 Bushing $2.50 15 M310 Bolt & Nut $3.70 16 M2050 M303 Snap ring Cotter Pin $3.10 $0.70 17 M606 Bushing $6.50 18 M611 Lifting Link Pin $8.50 19 M515 Push rod axle $15.10 20 M502 Push Rod, 48" $127.70 21 M520 Clevis $24.70 22 M404 Roll Pin $1.10 23 M512 Pin $7.10 24 M650 M651 Lifting link, 20.5"W Lifting link, 27"W SP ORD 25 M612 Roll pin $2.20 26 M605 Shoulder pin $4.10 28 M2009 Traverse (Old Style) SP ORD 29 M505 Push rod, 48" (new style) SP ORD 30 M526 Bolt, nut & washer $6.50 31 M525 Eccentric $15.90 32 M655 M656 Lifting link, 20.5"W Lifting link, 27"W SP ORD 33 M2053 Set screw $2.20 34 M657 Traverse (New Style) SP ORD 35 M658 Grease fitting $2.20 36 M2050 Snap ring $3.10 37 M103 Washer $1.70 38 ML1016204-12 -------------- ML1016204 7" OD x 2" wide Steer whl w/  6204-12 brg ID Old style Bearing OD 1.85" and ID .718" (see picture) ----------------------------- 7" OD x 2" wide Steer whl w/  6204-20MM/.78 Bearing OD 1.85" and ID .78" The only difference in these bearings is inner bore diameter, .03" difference!  You have to take a wheel off, clean the bearing and see what number appears.  We have no idea when the bearings changed in serial numbers of jacks. $49.00 39 M104 Steer wheel axle 3/4" DIA $14.90 40 M103-1 Washer $1.10 41 M104-1 Steer wheel axle 20MM(.780") DIA $14.90 42 M302 Pin $3.80

Click to enlarge, then hover mouse pointer to find colored 4 arrow box, click to enlarge or shrink image. Mobile ML50 Hyd. Unit Parts Order Form here Ref # Part Description Price 1 M2050 Snap ring $3.10 2 M2051 Washer $1.40 3 M2052 Spring cap $8.40 4 M2018 Piston N/A 5 M2016* U-cup See Kit Below 6 M2012 Spring $35.00 7 M2017* Scraper 7/8"ID See Kit Below 8 M2015* O-ring See Kit Below 9 M2014 Pump cylinder $125.20 10 M2013* O-ring See Kit Below 11 - Handle N/A 12 M2035 Bushing $6.50 13 M2034 Handle bolt $4.00 14 M2037 Roll pin $1.10 15 M2019* Screw plug See Kit Below 16 M2020* Spring See Kit Below 17 M2022* Ball See Kit Below 18 M2011* Ball See Kit Below 19 M2019 Screw plug $2.90 20 M2048 Filter $13.10 21 M2023* Spring See Kit Below 22 M2053 Set screw $2.20 23 M2008 Snap ring $4.60 24 M2010 Traverse bearing $65.80 25 M2030* O-ring See Kit Below 26 M2028* Spring See Kit Below 27 M2029 Release pin $33.40 28 M2036 Nut $4.20 29 M2006* O-ring See Kit Below 30 M2005 Filler plug $1.80 31 - Hydraulic unit N/A 32 M2031 Roll pin $1.10 33 M2026 Adjusting screw $2.10 34 M2025 Nut $1.40 35 M2033 Release lever $50.00 36 M2041 Chain connector $2.70 37 M303 Cotter in $1.10 38 M2042 Chain $1.70 39 - Control rod N/A 40 M1996 Plate $2.90 41 M1997 Ball $4.70 42 M1998 Snap ring $3.00 43 M1999 Bearing $45.20 44 M3031 Snap ring $8.70 45 M2047 Snap ring $4.80 46 M1994* Scraper See Kit Below 47 M2002* O-ring See Kit Below 48 M2003 Bushing $65.00 49 M2004* O-ring See Kit Below 50 M2000C Ram $181.00 51 M1993 Bushing $18.20 52 M2007 U-cup $16.00 * 2044 Seal Kit In a previous request we found this NLA NLA

Click to enlarge, then hover mouse pointer to find colored 4 arrow box, click to enlarge or shrink image. Mobile ML55 Hyd. Unit HINT - Look at the PUSH ROD in the FRAME print, item 29 and item 20, they are physically different.  Which type do you have?   That will tell you if you should order OLD Style or NEW Style. Parts Order Form here Exploded Parts Page - Thumbnail Click and Print from New Window Ref # Part Description Price 1 M3022-1 - Handle assy (new style) Handle assy (old style) $199.80 N/A 2 M2037 Roll pin $1.10 3 M2034 Handle bolt $4.00 4 M2035 Bushing $6.80 5 M2034-1 Handle pin $4.10 6 M606 Bushing $6.10 7 M3027 Snap ring $3.90 8 M3004 Screw plug $3.90 9 M3003* O-ring See Kit Below 10 M2033* Spring See Kit Below 11 M2022* Ball See Kit Below 12 M3002* Pin See Kit Below 13 M3000 Valve $26.20 14 M3001* O-ring See Kit Below 15 M3031 Snap ring $8.70 16 M2050 Snap ring $3.10 17 M2051 washer $1.40 18 M2052 Spring cap $8.40 19 M3019 Piston 7/8" OD (old style) $72.40 20 M2017* Scraper 7/8" ID (old style) See Kit Below 21 M2015* O-ring See Kit Below 22 M3020* Quad ring See Kit Below 23 M3021 Spring $37.90 24 M1997 Ball $4.70 25 M1998 Snap ring $3.00 26 M1999 Bearing $45.20 27 M2047 Snap ring $4.80 28 M2002* O-ring See Kit Below 29 M2003 Bushing $65.00 30 M2004* O-ring See Kit Below 31 M2000C Ram $181.00 32 M1995 Snap ring $4.70 33 M1993 M1993-1 Bushing (old style 1.5") Bushing (new style 0.5") $18.20 N/A 34 M2007* U-cup See Kit Below 35 M1994* Scraper See Kit Below 36 M2036 Nut $4.20 37 M2005 Filler plug $1.80 38 M2006* O-ring See Kit Below 39 M2028* Spring See Kit Below 40 M2029 Release pin $33.40 41 M2030* O-ring See Kit Below 42 M3023-1 M3024-1 Hydraulic unit Hydraulic unit assy N/A N/A 43 M2053 Set screw $2.20 44 M2010 Traverse bearing $65.90 45 M2008 Snap ring $4.60 46 M3016 Connecting pin $3.75 47 M2031 Roll pin $1.10 48 M2026 Adjusting screw $2.10 49 M2025 Nut $1.40 50 M3015 Release lever $58.10 51 M3014 Chain connector $3.50 52 M303 Cotter pin $1.10 53 M3017 Chain $18.90 54 M3018-1 Control rod $33.40 55 M1996 Plate $2.90 56 M3075 Piston 3/4"OD (new style) $72.40 57 M3077* Scraper 3/4"ID (new style) See Kit Below 58 M3076* U-cup 3/4"ID (new style) See Kit Below * 3025 Seal Kit (see pictures) $57.80

page updated 4/06 cm

Material handling products Clegg Co. copyright March 2000
Webmaster edclegg at forkliftcosts.com