PRINT THE WHOLE PAGE, Then Click the exploded view images, these will open in new window and print them.  Now you 
have a parts catalog.

If you have an ECO labeled truck it can be stainless steel, mild steel or galvanized steel.
Tell us what your truck is made of, when ordering ECO parts.

Gillis HPT truck is mild steel only.

Caution:   These jacks on these pages are mostly garden variety standards, collapse to 3" and raise to 7" or there-abouts.
YOU might have a low profile jack and not know it, the give away is the wheels.  MOST common jacks use fork load wheels
 measuring 2.75" to 3.25" OD, and steer wheels of 6.5" to 8".  If your jack has wheels LESS than these numbers, you may need 
extra assistance buying wheels. 

ECO-I55 manual Click to enlarge, then hover mouse pointer to find colored 4 arrow box,  click to enlarge or shrink image. ECO and Gillis HPT Pallet Truck Frame Assembly Parts in green are stock items Electronic parts Order and Info Form Print Toll Free Fax Order Form Click for larger image, then print it - MS I.E. Reduces Images on first loading, move cursor over image and a colored box with 4 arrows appears, click to enlarge image. Checked by EdC

Item & Part Number Description Price Each G1 Handle assembly 62.93 G2 Steer wheel axle 10.89 G3 Steer wheel axle bolt local G4 Pump Support Bearing 12.10 G5 Pump Support Base 27.11 G6 Spring Pin or Roll Pin 1.00 G7 Axle. retaining ring - large external snap ring 2.00 G8 Steer wheel solid black High Density poly - price includes bearings $48.00 G9 Steer wheel bearing, 2 per wheel 13.20 G10 Half round retaining ring 2.00 G11 Bearing cover, our wheel bearings are sealed, cover not needed 2.00 G12 Snap ring, for axle shaft tip 2.00 G13 Hub Cap, rarely needed, our wheel bearings are sealed 5.00 G14 Pin 3.00 G15 Grease fitting local G16 Spring Pin or Roll Pin 1.00 G17 Clevis Joint 6.74 G18 Clevis Pin 1.00 G19 Straight tappet, other jack makers call this push rod 58.06 G20 Long shaft or bell crank shaft for G43 Rocker Arm 36.36 G21 Snap ring 1.00 G22 Grease fitting local G23 Guide or Roll Sheath 2.00 G24 Spring Pin or Roll Pin diagram actually in error, shown pointing at Shaft  but should be pointing at G25 item 2.00 G25 Shaft - load wheel frame/push rod shaft diagram actually in error, shown pointing at Roll Pin but should be pointing at G24 item Shaft 5.96 G26 Shaft - load wheel frame pivot shaft, or hanger axle 9.58 G27 Spring Pin or Roll Pin 1.00 G28 Roll ring - actually a nylon exit roller, helps jack exit bottom board pallets 4.00 G29 Shaft - load wheel 8.68 G30 Spring Pin or Roll Pin 1.00 G31 Load Wheel Frame or Lift Bracket, or hanger 30.98 G32 Spring Pin or Roll Pin 1.00 G33 Shaft for tandem wheel load wheel 7.68 G34 NOG - fork wheel, aka Bogie Link 9.67 G35 Load Wheel - for single axle truck $39.00 G40 Frame NA G41 Lock washer local G42 Bolt local G43 Rocker Arm 64.58 G44 Nut local G45 Load wheel tandem axle set up, 2 required 40.00

 

Click to enlarge, then hover mouse pointer to find colored 4 arrow box, click to enlarge or shrink image. ECO and Gillis HPT Pallet Truck Handle Assembly Parts in green are stock items Electronic parts Order and Info Form Print Toll Free Fax Order Form Click for larger image, then print it - MS I.E. Reduces Images on first loading, move cursor over image and a colored box with 4 arrows appears, click to enlarge image. Checked by EdC

Item & Part Number Description Qty Price G109 Handle Pin 1 $5.00 G110 Locking Pin 1 $3.00 G111 Handle Pressure Roller 1 $5.86 G112 Handle Pin Bushing 1 $2.33 G113 Pull Pole 1 $2.49 G114 Handle Bushing 2 $4.13 G115 Chain 1 $20.86 G116 Nut 1 $1.00 G201 Screw 2 $1.00 G202 Cover 1 $2.99 G203 Handle 1 $3.40 G204 Pin 1 $1.00 G205 Pin 1 $1.00 G206 Handle Tube 1 $42.05

Click to enlarge, then hover mouse pointer to find colored 4 arrow box, click to enlarge or shrink image. ECO and Gillis HPT Pallet Truck Pump Assembly Parts in green are stock items Electronic parts Order and Info Form Print Toll Free Fax Order Form Click for larger image, then print it - MS I.E. Reduces Images on first loading, move cursor over image and a colored box with 4 arrows appears, click to enlarge image. Checked by EdC

Item & Part Number Description Qty Price G117 Screw 2 $2.00 G118 Handle Pivot Pin 2 $6.66 G119 Screw Plug 1 $5.39 G120 Rubber Washer 2 1.00 G121 Spring 1 1.00 G122 Damping Valve Spindle 1 5.00 G123 Damping Valve Seat 1 5.00 G124 Ball Valve 1 4.00 G125 base   NA G126 Washer 2 1.00 G127 Bolt 2 1.59 G128 Spring 1 1.00 G129 Strike Pin 1 5.00 G130 O-Ring 1 2.00 G131 Axle sleeve 1 5.71 G132 O-Ring 1 1.00 G133 Bolt 1 1.00 G134 Nut 1 1.00 G135 Lever Plate 1 9.68 G136 Bolt 1 2.00 G137 Spring 1 1.00 G138 Ball Base 1 3.18 G139 Steel Ball 1 1.00 G140 shaft 1 1.00 G141 Y-Ring 1 12.10 G142 O-Ring 1 1.59 G143 Cylinder Cap 1 26.20 G144 O-Ring 1 1.00 G145 Dust Ring 1 6.85 G146 Steel Ball 1 1.00 G147 Pump Plunger 1 12.64 G148 Washer 1 1.33 G149 Spring 1 7.86 G150 Dust Ring 1 3.72 G151 Y-Ring 1 8.98 G152 Piston Rod 1 33.92 G153 Washer 1 1.00 G154 Retaining Ring, Axle 1 1.00 G155 Seal Kit 1 $79.00

4/06 CM

Material handling products Clegg Co. copyright March 2000
Webmaster edclegg at forkliftcosts.com